Description
FIVE USED LAGERWEY WIND TURBINES
LW18-80 (80kW) IMMEDIATELY AVAILABLE
Price 21,000 EUR ($28,000) per unit ‘where is – as is’ ExWorks owner’s site.
-
- Turbines are already dismantled
-
- The youngest machine is built in 1995, the oldest is 1992 and the two others are 1992 to 1995
-
- Also, sell single units
-
- Three-part galvanised steel tower – hub height 31m
-
- Previously in operation in Holland until 2006
-
- Service history available
-
- In 2007 all these machines have been prepared for re-installation. Rotor and Head (mechanism controlling wings) have been serviced by Bettink Ltd, a Dutch company specializing in Lagerway machines.
-
- Blades fully refurbished in 2007
-
- Copy of invoices available on request.
-
- Gearboxes, generators all in working order. No mechanical damage. Ball bearing should be verified by the buyer for tear and wear.
-
- Two units come without controller (These two units will be €1,500.00 EUR cheaper i.e. €19,500.00 per unit without controller unit
TECHNICAL SPECIFICATION
GENERAL
-
- design according to NEN 6096
-
- certified by CIWI (ECN) – Holland
-
- cut in wind speed 3 m/sec.
-
- nom. windspeed 12 m/sec.
-
- cut out operating windspeed 25 m/sec.
-
- max. survive windspeed 60 m/sec.
-
- nominal power 80 kW
-
- specific power 315 W/m2
-
- calculated lifetime min. 20 years
ROTOR
-
- number of blades 2
-
- rotor position upwind
-
- the angle of the main shaft 70 with the horizon
-
- diameter 18 m
-
- swept area 254 m2
-
- speed variable 60 -120 rotations per minute
-
- power regulation passive: blade-angle adjustment
-
- active: fully variable mutator system
-
- min. blade-angle 6,30
-
- cone-angle 180 -1640
-
- direction clockwise
-
- location main bearing attached to the gearbox
BLADES
-
- blade length 7,8 m
-
- chord 500 – 625 mm
-
- twist 50
-
- material carbon fibre reinforced epoxy
-
- mounted flexible
-
- manufacturer A.T.V., Marseilles, France
GEARBOX
-
- number of stages 2
-
- ratio 1:20
-
- nominal torque 8050 Nm
-
- manufacturer Flender, Germany
GENERATOR
-
- type asynchrony
-
- nominal power 80 kW
-
- number of poles 4
-
- nominal voltage 400 volt
-
- frequency variable: 40 – 80 Hz.
-
- protection IP 55
-
- manufacturer ABB or equal quality
GRID-CONNECTION
-
- converter diode-bridge – mutator
-
- converter principle AC – DC – AC
-
- power supply 400 V / 3 phase / 50 Hz.
TOWER
-
- type cylindrical pipe
-
- number of sections 3
-
- hub height 31 m or 41 m
-
- material hot-dip galvanised steel
-
- location ascent external
YAW-SYSTEM
-
- system active
-
- signal based on the wind vane
-
- driven by e-motor with a worm-wheel reduction
-
- power yaw-motor 0,55 kW
-
- yaw speed 1,20/sec.
-
- yaw bearing crown-bearing; externally geared
-
- yaw-break constant friction-break; 4 pcs.
Controller
-
- control by Microprocessor
-
- remote monitoring optional; typically via the public
-
- telecommunications network
SAFETY
-
- aerodynamic break by aerodynamic torque
-
- safety measures – passive blade-angle adjustment
- – (emergency) yawing out of the wind at
-
- a wind speed above 25 m/sec.
MASSES
-
- Rotor 900 kg
-
- nacelle including rotor 3.000 kg
-
- tower excluding nacelle 10.000 kg
DOWNLOAD TECHNICAL DOCUMENTS:
- LW18-80_Description.pdf
- LW18-80_Operating_Instructions.pdf
PLEASE NOTE
- Inspections can be arranged by issuing a signed letter of intent.
- No time wasters, please
Wind Park Dismantling, or Wind Turbine Recycling required? Visit NeoCyce
Call us today on +44 77 888 66 846